Troubled Water: Common Causes of Water Discoloration

When you turn on your bathroom faucet, the water that comes out doesn’t always look pure and clear, it may appear cloudy or yellow instead. This discoloration often occurs due to a number of reasons. If you have concerns about your water discoloration and what could be causing it, a plumbing Toronto expert lists the five common causes and what you can do to fix them.

New Water Source:

The most common cause of water discoloration is a new water source. If your home has been connected to a well or municipal supply, the change in the quality of your drinking water could be the culprit.

This is because many water sources contain natural minerals like iron or manganese that may not have been present in your previous supply. When these minerals are introduced to the pipes leading to your home, they will react with chemicals in the pipes, which will cause rust or mineral deposits to form on them.

Algae:

Water that is a green, blue, or brown color is usually the result of algae. Algae live on the surface of fresh or saltwater. If your water source is stagnant and has a lot of algae in it, there will be more algae to grow. Algae cells contain chlorophyll which gives the water a greenish tint. The best way to remove this type of coloring from your drinking water is by using an activated carbon filter.

Sediments:

According to an emergency plumber Toronto, Water that looks murky or cloudy is often a sign that sediments are present. Sediments are made up of suspended particles that result from organic matter, minerals, dirt and other substances. Sedimentation occurs when solids settle to the bottom of the container and liquids rise to the top.

When you turn on your tap in your house, there will be a certain amount of sediment in the pipes which can then end up in your drinking water as it flows through. Talk to a plumbing Toronto expert if you need help.

Your Water Heater is Too Old:

If your water heater is more than ten years old, it's probably time to replace it. The older the water heater, the more likely that a sediment buildup will turn your once clear hot water into a murky brownish color. This is due to mineral deposits left behind from the boiling process. Not to mention, older units also tend to be less efficient, costing you more money in energy bills.

Discolored water isn’t just an eyesore, it’s also potentially harmful to your health. By identifying the cause and following the appropriate solution, you’ll get crystal-clear water in no time! Seek the help of a qualified plumber if you notice discolored water often. They can assess the situation and help you out with services like drain repair Toronto and more.

When to Replace Your Home's Plumbing Pipes? 6 Signs To Look Out For

Plumbing pipes are responsible for carrying water throughout your home to help you live your life and be comfortable. However, they’re not indestructible. If your plumbing Toronto are several years old, you may want to start thinking about replacing them before any serious issues happen. Over time, pipes develop cracks and leaks, which can lead to costly repairs. Here are six signs that indicate it may be time to think about replacing your pipes.

There Are Cracks on Pipes:

Start by looking for any cracks on your pipes. Even a small crack can signal structural problems and an impending leak, so it is best to have these repaired before water reaches the break. A bigger crack or hole can be patched with a rubber fitting but will need a new pipe that goes through the wall to be professionally installed. If you don’t take care of plumbing issues as they arise, they can lead to costly repairs down the line.

Talk to a plumber Toronto about what to do if you find cracks in your pipes. They might recommend replacing some or all of your pipes, depending on the severity. Just make sure that whoever installs the new piping has enough room around them to work comfortably and safely.

Water Takes a Long Time to Reach Faucets or Sinks:

One of the most telling signs your pipes are nearing the end is if water takes a long time to reach faucets or sinks. If you are noticing this, it is likely that the blockage is between your faucet and pipe, and there could be anything in the way. There could be debris lodged around either or even something that has grown over time like tree roots.

These types of things can severely impede the flow of water through pipes so they will need to be removed as soon as possible to make sure everything continues flowing normally. If you don’t act on it, then your pipes could burst, which would create an enormous mess and waste tons of money.

Pipes are Corroded:

Pipe corrosion is often caused by moisture or minerals in the water. Factors like how old your pipes are, how often you have water flowing through them, what kind of minerals are in the water, and where your home is located can all contribute to pipe corrosion. The older your pipes, the higher risk of corrosion you face. Homes that never run their faucets without a drip also typically have corroded pipes, since there is no airflow to dry out the pipes. If you have hard water in your home it can also increase corrosion risks as it usually contains high levels of calcium and magnesium, both of which will contribute to pipe corrosion over time. Talk to a plumber about replacing your plumbing pipes if any of these conditions apply.

Frequent Water Leaks:

Frequent leaks from your faucet is one sign that you may need to replace the pipes in your home. If there are water leaks but only for a few minutes and then it stops, you may have a leaky seal or valve, both of which can be fixed with an easy home repair. However, if your water leaks consistently for longer than 24 hours at a time and cannot be stopped by changing the configuration of the faucets, you may need to replace pipes.

The old iron piping is subject to rust and it could lead to a major pipe break when they start corroding under extreme pressure. Iron also tends to release substances that will corrode copper plumbing pipes. If that's the case, you should contact an emergency plumber Toronto to get an estimate on how much the replacement project will cost.

Exposure to Lead:

There are a number of signs you should look for if you suspect your plumbing pipes may contain lead, including but not limited to the following:

•     Foul odor coming from bathroom fixtures and pipe parts inside the home (particularly when water is turned off).

•     Necessity to use excessive amounts of water or detergents when cleaning.

•     Chronic dry skin conditions such as eczema.

If you believe your plumbing pipes may be exposing you to high levels of lead in your drinking water, we recommend consulting with a professional plumber and ask for a plumbing upgrade.

Slow Draining of Sinks, Tubs, and Toilets:

If you notice your toilet is slow-draining, then this may be an indication that the pipe needs to be replaced or toilet repair Toronto is imminent. And while slow-draining isn't a guarantee that pipes are going to have to be replaced, it does increase the odds. As such, if you find that after turning on your sink for 5 minutes and it hasn't drained any water, then this may also indicate the need for a replacement pipe.

There are many signs that indicate your home’s plumbing pipes need to be replaced, but these five are the most prominent. Make sure you check your home’s plumbing pipes regularly so that you can catch any of these problems early on and avoid costly replacements down the road. A plumber can help you determine if your plumbing needs to be replaced, so get in touch with them for a plumbing inspection or for other services like drain repair Toronto and more.

These Signs Indicate That Your Water Heater Must be Replaced

Water heaters in your home can run for many years, but eventually they will reach the end of their lifespan and need to be replaced. Depending on the age of your current water heater, it might be time to replace it with a new one before it leaks or breaks down completely. An expert plumber in Toronto lists the four signs that it’s time to replace your water heater.

The Water is Not Hot Enough:

When you try to take a shower and can’t get hot water, that may mean your water heater is on its last legs. If you don’t have enough hot water for showers or baths, it could also indicate a problem with your plumbing Toronto or pipes. A professional plumber can check all of these things out for you and make recommendations about whether it would be best to replace your old water heater or if there are other solutions available.

Do you have leaks?

One of the most common signs that a water heater needs to be replaced is if you have leaks. You may notice drips or trickles of water coming from areas such as pipes, valves, and radiators near your water heater. If your tank begins leaking consistently (either under pressure or due to corrosion) you’ll want to consider having it replaced soon. Leaks can lead to severe damage in other parts of your home, including mold growth in walls and ceilings. They can also cause rot in wood floors, ceilings, beams, subfloors, and other structural components.

Water Looks Muddy:

If your water heater is old, sediment can start to build up. The result is muddied-looking water that may also smell worse than normal. If you notice an increase in sediments on your clothing or in your bathtubs and showers, it could be time for a new water heater. Sediment buildup can cause problems like decreased hot water pressure and increased risk of scale buildup in pipes. If you suspect sediment buildup, it’s probably best to have a professional plumber in Toronto come and check things out.

You Hear Strange Noises:

If you notice strange sounds coming from your water heater, like clicking or popping noises, it may need to be replaced. These sounds can indicate that a valve inside is worn out or inoperable and needs replacement. Even if you just end up needing a new valve instead of a whole new water heater, such repairs will be handled well by a qualified plumber.

While it’s easy to take your water heater for granted, it’s worth taking the time to check up on it occasionally to make sure it’s in good condition. If you have an older model, you may need to replace it soon, but don’t throw away your current one until you notice the signs mentioned above. Contact an emergency plumber in Toronto if you’d like to know more.